Normally, this would be considered a Cool Tool, but since it hasn’t officially debuted yet...
Set to debut in April 2024, Milwaukee Tool is offering a new M18 Brushless Single Acting 60in3 10,000psi Hydraulic Pump that will eliminate the strenuous and frustrating experience of manual hand pumps.
A direct replacement for manual hand pumps, Milwaukee’s single-acting hydraulic pump will push fluid to the connected hydraulic cylinder or tool to lift, push, pull, punch, cut, split, or spread materials. The hydraulic pump promises to deliver improved efficiency on the job, whether lifting equipment to perform maintenance, wedging material or equipment apart to gain clearance, or splitting nuts to replace a flange.
Improving productivity and increasing application speeds on the job site, this battery-powered hydraulic pump delivers up to 2.5x faster application speeds than hand pumps.
Needing up to 95 percent less muscle effort versus a hand pump, the portable hydraulic pump allows users to simply pull the trigger and go, reducing operator fatigue caused by the repetitive motion of manually pumping at increasingly higher pressure. The pump features 60in3 of usable oil to extend a variety of different tonnage and stroke length cylinders to full stroke and is fully compatible with existing 10,000psi single-acting-rated hydraulic hoses, cylinders, and tools.
To control the return flow, a manual valve allows precise control when releasing pressure, and a bladder window allows users to gauge the fluid level quickly. When paired with an M18 REDLITHIUM XC5.0 Battery Pack, the hydraulic pump can complete up to 20 lifts (simulated lift with 10T, 4-inch cylinder at 7,000 psi), 100 splits (splits 1-inch, 8TPI grade-5 nuts), or 175 spreads (simulated spread with 1T spreader at 7,000 psi) on a single charge.
Milwaukee is committed to improving productivity by providing performance-driven and trade-focused solutions so users can perform an entire day’s work on one battery system. The M18 Brushless Single Acting 60in3 10,000psi Hydraulic Pump is fully compatible with the entire M18 line, now offering more than 250 power tool solutions.
Specifications:
M18 Brushless Single Acting 60in3 10,000psi Hydraulic Pump - $1,500.
- Maximum Operating Pressure: 10,000 psi;
- Cylinder Compatibility: Single Acting;
- Reservoir Capacity: 60in3;
- Output Flow Rate (No-Load): 18in3/minute;
- Output Flow Rate (9,500 psi): 10in3/minute;
- Valve Operation: Manual;
- Trigger Lock-Out: Yes;
- Compatible with: Cone poppet and ball poppet male quick-connect couplers;
- Weight (w/M18 REDLITHIUM XC5.0): 12.6 lbs;
- Length (w/M18 REDLITHIUM XC5.0): 18 inches;
- Height (tool-only): 9.5 inches;
- Width (tool-only): 5.4 inches;
- Warranty: 3 years (tool), 3 years (battery).
Kit Includes: (1) M18 Brushless Single Acting 60in3 10,000psi Hydraulic Pump, (1) M18 REDLITHIUM XC5.0 Battery Pack, (1) M18 & M12 Multi-Voltage Charger, (1) Shoulder Strap, and (1) 3/8” NPTF Female Quick Connect Cone Poppet Coupler.
Milwaukee Tool, founded in 1924, is a global leader in delivering innovative solutions to the professional construction trades that increase productivity and safety. Milwaukee is known for its M12, M18, and MX FUEL cordless systems, the ground-breaking performance of their cordless innovations, safety solutions, battery-powered outdoor power equipment, job site lighting and clean-up, time-saving tool accessories, and innovative hand tool and PACKOUT modular storage products.
The company is a Brookfield, Wisconsin-based subsidiary of Techtronic Industries Co. Ltd. For more information on the full line of Milwaukee products, call 1-800-SAWDUST or visit www.milwaukeetool.com.