At the recently concluded The Utility Show 2025, VMAC (www.vmacair.com) attended, debuting several innovations in compressed air and multifunction systems. Service Truck Magazine was in attendance and met with the air compressor supplier.
- G90 with FlexDrive AMS (Advanced Monitoring System): A gas-driven compressor delivering up to 90 CFM at 100 psi continuously and 50 CFM at 170 psi for high-pressure applications—all from one system (see image at top).
- VMAC e30 with Stealth Power: The world’s most compact, lightweight, and intelligent battery-electric 30 CFM rotary screw air compressor.
- 6-in-1 Multifunction Power System (Honda-powered): The only gas-powered system with built-in hydraulics, offering 40 CFM compressed air, 8 kW electric power, 250 A welding, 12V/24V charging, 300 A boosting, and 8 GPM hydraulic flow.
- Multi-Port Air Manifold: A new solution for transforming service trucks and vans into efficient pneumatic workstations.
G90 with FlexDrive AMS
VMAC
VMAC G90 Air Compressor - Front View
VMAC G90 Air Compressor
The G90 with FlexDrive AMS is the only gas-driven air compressor that automatically adapts to deliver optimal air flow and pressure for any job, with up to 90 CFM at 100 psi continuously and up to 50 CFM at 170 psi for high-pressure applications.
With the G90 gas-driven air compressor and FlexDrive AMS, crews only need one machine to power their jobsite tools, delivering up to 90 CFM of adaptive airflow and pressure in a single compact, affordable machine.
Using it, work crews can run heavy-duty tools like jackhammers, rock drills, and cutting saws without having to haul a trailer or tow-behind air compressor. Mobile tire technicians benefit from the G90’s versatility, as a higher psi at high continuous air flow enables operators to inflate tires faster and power large pneumatic tools like one-inch impact wrenches efficiently.
The G90 is quiet when compared to similar systems, emitting just 73 dB at high idle. Featuring noise reduction panels along with its Unload and Standby modes, VMAC said that jobsite noise is reduced, allowing easier communication between crew members and the neighboring surroundings.
The G90 features intelligent digital controls—with optional telematics—providing real-time data, smart diagnostics, remote start/stop, error codes, and automated performance for an efficient operation. It also includes standard safety features such as compressor and engine overheat shutdown, automatic rapid blowdown valve, 200 psi air pressure relief valve, battery protection, and automatic cold climate protection.
The G90 features the EC100 encapsulated rotary screw compressor, delivering cleaner and more efficient compressed air with reduced maintenance, providing operators with maximum uptime reliability.
E30 with Stealth Power
VMAC
e30 with Stealth Power_Vent Panel Side
e30 with Stealth Power
Building on its history of unveiling transformative technologies, VMAC showcased its new battery-electric powered rotary screw air compressor, the VMAC e30 with Stealth Power, the world’s most compact, lightweight, and intelligent battery-electric powered 30 CFM rotary screw air compressor.
“This collaboration between VMAC and Stealth Power is delivering a product that meets the evolving needs of today’s service truck industry,” stated Christina Arrington, Senior Vice President of Strategic Growth at Stealth Power. “With its superior runtime, advanced data capabilities, and compact design, the e30 is positioned to redefine mobile power efficiency.”
Designed specifically for next-generation electric and hybrid service trucks and vans, the VMAC e30 with Stealth Power offers an unmatched combination of power, performance, and sustainability. Engineered and manufactured in North America, this all-electric air compressor sets a new industry standard by reducing noise, emissions, and fuel consumption while maximizing efficiency, productivity, and reliability.
The VMAC e30 with Stealth Power delivers continuous 30 CFM at 100 psi (150 psi max) using patented VMAC rotary screw technology, ensuring a performance with a 100 percent duty cycle. By integrating Stealth Power’s advanced NMC battery technology, the e30 delivers 92 percent more runtime per charge than competitors' systems, providing up to 75 minutes of run time at full air output.
Features of the e30 include:
- Industry’s lightest 30 CFM electric air compressor, weighing 393 lbs, and an 80 lb weight savings over competing systems.
- Industry’s smallest footprint, requiring only 22 square inches, making it 40 percent smaller than competitors’ systems.
- Industry’s longest run-time per charge—its advanced NMC battery technology provides up to 75 minutes of run-time at full air output, a 92 percent improvement over competitors’ systems.
- Ultra-quiet operation at 64 dB at 21 feet, significantly reducing noise pollution on job sites.
- Zero emissions—eliminates reliance on a vehicle engine, enhancing sustainability efforts.
- Stealth intelligence integration—optional data collection module (DCM) provides real-time performance monitoring, fleet optimization, and predictive maintenance.
6-in-1 Multifunction Power System – MF - Honda
VMAC
6in1 Honda Gas Multifunction
6-in-1 Honda Gas Multifunction
When you need the capabilities of multiple machines in a single powerful system, there is no better solution than the VMAC Multifunction Power System, powered by a Honda gas engine.
The 6-in-1 multi-power system includes everything needed for heavy-duty mechanic work and is engineered for service truck bodies. This Multifunction’s smart design reduces noise levels on the jobsite with noise reduction panels, automated idle controls, and standby mode, all in one compact package that fits on the side pack or behind the cab.
It features six power sources packed into one compact, gas-driven machine:
- 40 CFM of compressed air
- 8 kW of electric power
- up to 250 A of welding capability,
- 12V and 24V battery charging,
- 300 A boosting, and
- 8 GPM of hydraulic power
Crews can use just one function or all functions simultaneously (though simultaneous use may reduce the performance of the individual components), with the ability to seamlessly switch between operations with easy-to-use controls, eliminating the need to maneuver multiple machines on the jobsite.
This powerful machine is designed for today’s mobile mechanic—just turn it on and get to work.
Also a quiet machine, it emits only 73 dB at high idle, 63 dB at compressor idle, and 59 dB at low idle.
VMAC’s 6-in-1 gas-powered multifunction includes hydraulics to operate cranes, outriggers, and other hydraulic-driven equipment—with the truck engine turned off. This eliminates the need for a separate truck-mounted hydraulic system, freeing up valuable cargo space for tools, equipment, and materials, while also reducing GVW and fuel usage.
Multi-Port Air Manifold for Pneumatic Efficiency
VMAC
Air Manifold V2.3290
Multi-Port Air Manifold
VMAC said that its new advanced multi-port air manifold has been engineered to transform service trucks and vans into highly efficient and organized pneumatic workstations.
This precision-machined manifold block is constructed from robust, corrosion-resistant material that provides a streamlined, durable solution for operators across various industries.
The VMAC Air Manifold supports seamless connectivity, accommodating multiple hose sizes with 3/8” and 1/2” quick-connect fittings and a robust 1” Chicago fitting, ensuring compatibility with diverse air tools from impact wrenches to jackhammers. With a maximum airflow capacity of 185 CFM and operating pressures up to 200 psi, the VMAC air manifold significantly reduces pressure drops and shortens airflow paths, resulting in increased energy efficiency and lower operational costs.
"VMAC’s multi-port air manifold addresses the critical need for efficiency, safety, and convenience on job sites," commented Mike Pettigrew, Marketing Manager for VMAC. "Operators can easily switch between tools for maximum productivity, reducing setup time and preserving air pressure."
An additional safety feature includes a manual ball valve paired with a sintered exhaust muffler, allowing operators to depressurize tools rapidly and safely. This ensures a safer and more efficient work environment, particularly on construction sites and in industrial maintenance applications.
The VMAC air manifold’s compact design promotes optimal vehicle organization by eliminating messy adapters and unnecessary hoses, directly improving operational workflows and vehicle aesthetics.
The VMAC air manifold is ideally suited for:
- Service Trucks: Allowing rapid, adapter-free connections to multiple pneumatic tools.
- Construction Sites: Supporting efficient, hassle-free transitions between tools like jackhammers and impact wrenches.
- Industrial Maintenance: Ensuring optimal performance by supporting tools requiring varied pressures and flow rates.
The VMAC Air Manifold, 6-in-1 Multifunctional Power System, G90 with FlexDrive AMS, and the e30 with Stealth Power are now available for purchase through VMAC’s extensive dealer network. For more information, visit www.vmacair.com.